The complete set for the construction of a 4-meter greenhouse 3 sheets of mobile polycarbonate in the shape of rolls of 2.1 m length and a diameter of 60-90 cm. The depth of this substance is 4 mm.

If you want, you can increase the period of the structure to 6 metres or more. To try it, it is sufficient to attach a two-meter expansion. When choosing a drawing, pay attention to the distance between the arches. This figure needs to be 65 cm, that’s the most appropriate duration for the specified depth of this substance. The diameter of the doors according to the manufacturer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it’s important to pick a location for the place. If this is done properly, you can provide yourself with a crop of fresh vegetables for the whole calendar year.

The location for your future greenhouse is marked immediately in the preparation of the garden plot. So as to melt the snow in the positioning of their greenhouse as soon as possible, the best point on the site is going to be a slight elevation. In addition, in this location will not have to be concerned about substantial humidity as dirt and air within the construction.

Assemble a polycarbonate greenhouse in an elevated site – intends to look after the best temperature inside.

When it isn’t feasible to place a greenhouse in an elevated place, you will have to pour a layer of fine shattered rock about 20 cm and the identical layer of fertile soil to make seedbeds.

Before building a greenhouse on your garden plot, it’s also wise to consider where and how this construction will be set up. First, you must choose a location for this. The greenhouse ought to be found in a metropolitan region at least a couple meters away from houses, barns and other structures.

How to install a greenhouse Based on the sides of the Planet

Be sure to level the soil surface – it’s best to even remove the surface. This can also get rid of weed seeds. And for simplicity of work, eliminate the dirt in a place that is going to a meter wider on all sides of the rectangle that you desire.

It’s also worth thinking about using a base. As producers state, today most greenhouses don’t need it, particularly if they (greenhouses) are employed just in the spring and summer period. But, experienced gardeners still suggest making at least a basic foundation from a pub. It’s very simple – it’s enough to associate with each other utilizing metal corners and screws four pieces of timber with a cross-section of at least 10 * 10 cm. The dimensions of such a base should be equivalent to the base of their upcoming greenhouse.

Simple bar base

You could even produce a strip foundation of concrete. He’s more reliable than a pub base, but demands greater financial and labour expenses. Incidentally, the greenhouse, that will be utilised in winter, without it and do not do with it whatsoever.

Stages of the creation of a strip foundation: a schematic representation

Many producers counsel to set up greenhouse structures without even building a base. For this function, they equip the framework with special T-shaped legs, so that the structure was securely fixed. However, as practice shows, it’s still crucial to construct a base: so and the foundation will be more firmly fixed and the elements of the foundation in contact with the ground, will be saved much longer in its original state.

The most important issue is to treat the material with specific agents to protect the wood from moisture. The gidpostroy.ru material is generally installed on concrete blocks that are dug into the soil. For a six-meter arrangement, they need 10 bits: four on each side and one in the center of the ends.

Before you do the greenhouse , you want to pick the right place for this. It must be an even site, so that the frame was found evenly, without distortions. It should be bright and not obscured by buildings or trees.