Gypsum tiles have to be laid correctly, as not just the aesthetic look of decorative facing, but also the service quality of the

substance will depend on the engineering of job. The product is more also universal, and it may be attached to plaster, concrete,

brick or gypsum board sheets, provided that the top layer of the base is even and has no flaws.

If the flaws of the foundation are significant, it ought masterfasada.ru to be completely treated with primer, then a cement mortar is made, which

matches all the cracks. Then the surface ought to be repeatedly primed and dried. Primer treatment is necessary to improve the

bond between the tile and the wall. In cases like this, its composition should pick a special, comprising elements that prevent

the appearance of fungus and mold.

In today’s interior of the rooms most frequently used gypsum tiles, imitating natural stone or brick. To execute cosmetic

finishing your self, it is essential first of all to choose a strategy of tile positioning and prepare a solution. It is crucial

to focus on the reverse side of the material. If its surface includes an embossed surface, then the glue should be put having an

even trowel, and if it’s even, then using a notched one.

The tech of the job is as follows:

* A thin layer of glue mortar is put on the pre-prepared wall. It is spread over the foundation so it is likely to place 4-5

tiles. Decorative cladding can be placed both on plasterboard, also on putty.

* Glue the back side of the tiles with glue.

* Plaster elements are pressed against the walls and their location is adjusted. To align with the seams, it’s recommended to

use spacers.

* Finishing is carried out in rows, all which should be changed by half of a tile. Facing is carried out to the corners of the

room, and then immediately eliminate any remaining mortar at the joints.

Drying the walls takes no more than a day also requires a constant humidity and temperature in the room. The last stage in the

laying of gypsum tiles is that their decoration. To get this done, the joints between these elements are full of a special

solution, the shade of which suits the brick.

Cosmetic fake of brickwork on the walls has been carried out in the following ways:

* Cutting on the plastered surface of the stitches of masonry using a bolt cutter with your hands;

* placing of tiles beneath the brick:

* mimicking the structure and color of the side of one brick;

* Imitating a fragment of brickwork of many bricks.

The best method to decorate”beneath the brick” will be the one that allows you to make a practical coating together with the

utmost appearance of its similarity to natural masonry. All three ways to execute this type of finishing works meet the needs, but

the cutting edge of joints using a bolt is labor-intensive along with the creation of large quantities of dust, and so let us

consider more common ways.

The old finish is removed from the walls, and the outside, if needed, is leveled to get rid of the need to glue plaster on a thick

layer of adhesive.

Combining these cladding with other kinds of interior finishes can be both orderly and performed without any apparent

consequences, chaotically, with fake of indications of aging.

With the support of cosmetic gypsum tiles it’s possible to mimic a large number of textures.

A lot of textures can be imitated with the support of decorative gypsum tiles.

The wall where it’s to be installed should have the following attributes:

* Hardness and intensity of the outside;

* The absence of irregular areas and sharp sections;

* no more deformations.

Cosmetic tiles in the interior of this kitchen

Walls are created from a variety of substances, so let’s break down the principles of installation.

When dealing with concrete, there will be no huge problems. It is only necessary to take into account the porosity of the

material. Concrete, which has virtually no pronounced pores, ought to be treated with a great primer.

Mounting gypsum tiles on concrete

Before beginning work on the installation of gypsum tiles onto the walls, it’s worth checking the strength of the surface. When

the plaster does not drop off the wall and in exactly the identical time holds well, it is possible to simply paint it using

primer.

Mount the tiles onto the painted concrete shouldn’t. The surface should be scratched, making sure to misfire, then it needs to be

grouted and coated with a coating of plaster.